Wallpaper Installation in Phoenix, Arizona

If there is material on the wall already, it’s necessary to deal with wallpaper removal in Phoenix, AZ. Wallcoverings often do not come off easily, though there are many tricks to try to get it to work. It’s still going to take much longer than planned and going to be far more difficult than expected. 

If the glue is added to the wallcovering and allowed to sit for too long, it will start to dry out. That’s going to mean the wallpaper isn’t going to stick. Even if it does stick at first, it can end up blistering. The way to prevent this is only adding paste to the paper as needed and using it before it starts to dry out. 

It can be easy to see which way some patterns go, but others may not be as obvious. Yet, once everything is hung, it’s going to be apparent which panels are hung upside down. The only way to avoid this is to pay close attention when hanging, as it will be difficult to impossible to fix after everything is done and dried. 

The edges of the paper are likely to dry out first. When the panels are being glued up, if the edges dry out, it can lead to peeling in the future. This can be avoided by hanging the sheets before they start to dry, even on the edges, or adding a little extra paste to the edges. 

It’s all too easy to end up with material that’s a little slanted. Most people assume the line between the ceiling and wall is straight, but it’s entirely possible that the line isn’t as straight as it looks. The first sheet of wallpaper may look okay, but as more are added, the misalignment will become apparent. 

The paper shouldn’t be overlapped, but it’s easy to end up with gaps between the paper when it isn’t overlapped a little bit. This is a common issue when homeowners attempt to hang wallpaper on their own and there really isn’t a solution other than being very careful.